The IC-6T packs proven materials and technology into a installer-friendly, UL-certified loudspeaker with an integrated back can and multi-tap transformer.

The two-way IC-6T features a swiveling Tractrix® Horn with aluminum dome compression driver, which allows contractors to direct the sound to specific areas more accurately than fixed position tweeter designs, minimizing disturbing sonic reflections even when the speaker is positioned in a less-than-optimal locaton. Other features include an injection-molded woofer cone, Santropene® surround, cast polymer woofer frame and screw-down terminals.

As a benefit for distributed line applications, the IC-6T features a 60-watt 70/100 volt multi-tap transformer. A single switch for the 8-ohm bypass and multi-tap setting is conveniently located on the front baffle. The IC-6T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

Built from the inside out for performance and durability, the IC-8T-SW packs a lot of substance into commercial sound system.

Most distributed audio systems are plagued with thin-sounding performances, but the new IC-8T-SW in-ceiling subwoofer changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70.7V/100V distributed-line systems. Since transformers severely limit a subwoofer's capabilities, this unique design is the perfect solution when building a great sounding commercial system. 

The IC-8T-SW adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the woofer. While most subwoofers use a port to increase output, the IC-8T-SW employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and minimizes turbulence that is often present in ported designs. Maximum continuous output is a remarkable 111dB. And since AES rated sensitivity is 92dB, adequate levels can be achieved with modest amplifier power using the IC-8T-SW. 

Other key features of the IC-8T-SW include the ability to easily switch from low impedance to high impedance distributed-line applications as well as mono and two-channel inputs in low impedance modes. This durable subwoofer has an ABS plastic baffle, formed steel back can and a four-point terminal strip input connector. The IC-8T-SW is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 061347) is also available for drywall ceiling installations.

The IC-5T packs proven materials and technology into a installer-friendly, UL-certified loudspeaker with an integrated back can and multi-tap transformer.

The two-way IC-5T features a swiveling Tractrix® Horn with aluminum dome compression driver, which allows contractors to direct the sound to specific areas more accurately than fixed position tweeter designs, minimizing disturbing sonic reflections even when the speaker is positioned in a less-than-optimal locaton. Other features include an injection-molded woofer cone, Santropene® surround, cast polymer woofer frame and screw-down terminals.

As a benefit for distributed line applications, the IC-5T features a 30-watt 70/100 volt multi-tap transformer. A single switch for the 16-ohm bypass and multi-tap setting is conveniently located on the front baffle. The IC-5T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.